The Speakers
The front speakers used on the DigiTheatre
setup are using magnetically shielded 4-inch woofers capable of frequencies
between 180 Hz - 20 kHz, 2-inch Neodynium Tweeters are used to provide crisp
and clear treble. Both of front speakers are built under a two-way design;
meaning they include both tweeter and mid-range units within their two-way
construction. The top and bottom can be adjusted to point in different directions.
The dimensions of the casing are 114mm (W) x 236mm (H) x 150mm (D). No Mount
wall support is present. (click to enlarge)
|
|
|
|
Main
woofer on front speaker
|
Mid-Range
Unit on front speaker
|
The surround speakers are using 4 inches
woofers similar to the ones used for the front units. However, no tweeters
are present. The 4-inch woofers are capable of frequencies between 140 Hz
to 20 kHz. As you may already noticed both of the surround speakers are using
a standard design compared to the two-way construction used for the front
speakers. To dimensions of the casing are 114mm (W) x 151mm (H) x 150mm (D).
Both of the surround speakers are featuring mount wall support.
|
|
|
Surround
woofer on rear speaker
|
The single
Center speaker is using a magnetically shielded 3-inch woofer capable
of frequencies between 140 Hz to 20 kHz. The dimension of the casing is 260mm
(W) x 106mm (H) x 155mm (D). Here either no wall mount support is available;
this is somehow less important for the center unit as it’s generally placed
on the TV Set.
|
|
|
Center
woofer on center speaker
|
